|
105Kva Caterpillar GEP105SP1 Perkins Engine
Single Phase Diesel Generator
Features:
Generator Set
- Complete system designed and built at ISO8528
certified facility
- Factory tested to design specifications at full load
conditions
- Fully engineered with a range of options
and accessories
ENGINE
- Industrial water cooled diesel engine
- Governor, mechanical
- Electrical system, 12 VDC
- Cartridge type fuel and oil filters
- Air filter
- Battery(s), rack and cables
GENERATOR
- Self excited brushless generator
- Insulation system, class H
- Drip proof generator air intake (IP23)
- Electrical design in accordance with BS4999, BS5000,
BSEN60034, BSEN61000, IEC60034
CONTROL SYSTEM
- Access 1500 Autostart control panel
- Vibration isolated sheet steel enclosure with hinged
lockable door
MOUNTING ARRANGEMENT
- Heavy-duty fabricated steel base with lifting points
- Anti-vibration pads to ensure vibration isolation
- Engine coupled to generator with flexible
disc coupling
- Baseframe incorporates integral plastic fuel tank, 8
hours running capacity
EXHAUST SYSTEM
- Heavy duty industrial capacity exhaust silencer
(approximately 25 dB reduction) supplied loose
COOLING SYSTEM
- Standard ambient temperatures up to 50° C (122° F)
- Fan, fan drive and charging alternator fully guarded
- Antifreeze protection coolant
CIRCUIT BREAKER
- 3-pole miniature circuit breaker (mcb) < 160 amps
and 3-pole molded case circuit breaker (mccb)
>= 160 amps
- Vibration isolated sheet steel enclosure with
removable cover plate
- Outgoing cable stub-up area directly below circuit
breaker
EQUIPMENT FINISH
- All electroplated hardware
- Anticorrosive paint protection
- High gloss polyurethane paint for durability and
scuff resistance
QUALITY STANDARDS
BS4999, BS5000, BSEN60034, BSEN61000, IEC60034
DOCUMENTATION
- Operation and maintenance manuals provided
- Wiring diagrams included
WARRANTY
- All equipment carries full manufacturer’s warranty.
- Extended warranty terms available
Specifications:
|
GENERATOR | |
|---|
| Make | Olympian |
| Model | LL3014H |
| Type | Self-excited, brushless |
| Voltage regulation | ±1.0% at steady state from
from no load to full load |
| Frequency | ±0.25% for constant load from
no load to full load |
| Waveform distortion | THD <4% |
| Radio interference | Compliance with BS800 and
VDE Class G&N |
| Telephone Interference | TIF <50, THF <2% |
| Overspeed limit | 2250 rpm |
| Insulation | Class H |
| Temperature rise | Within Class H limits |
| ENGINE | |
|---|
| Manufacturer | Perkins |
| Model | 1006TAG |
| Type | 4-Cycle |
| Aspiration | Turbocharged, AA Charge Cooled |
| Cylinder configuration | In line 6 |
| Displacement — L (cu in) | 5.99 (365) |
| Bore/stroke — mm (in) | 100/127 (3.94/5.0) |
| Compression ratio | 17.0:1 |
| Engine speed — rpm 50 Hz | 1500 |
| Piston speed — m/sec (ft/sec) 50 Hz | 6.35 (20.8) |
| Maximum power at rated rpm — kW (hp)Standby 50 Hz | 141 (188) |
| Maximum power at rated rpm — kW (hp)Prime 50 Hz | 135 (181) |
| BMEP — kPa (psi) Standby 50 Hz | 1964 (285) |
| BMEP — kPa (psi) Prime 50 Hz | 1767 (256) |
| Regenerative power — kW (hp)50 Hz | 12.6 (16.9) |
| Motor starting capability — kW (hp)50 Hz | 108 (145) |
| Governor Type | Mechanical |
| Class | ISO 8528 G2 |
| Fuel Capacity | 300 L |
| DIMENSIONS | |
|---|
| Length | 2675 mm |
| Width | 900 mm |
| Height | 1460 mm |
| Weight | 1560 kgs |
|
